Autopage RF-303 Manuale di istruzioni per l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Allarme auto Autopage RF-303. Autopage RF-303 18.

To replace the battery, carefully remove the case screw located at the end of the

remote transmitter where the key ring attaches to its case. Use a small blade

Phillips screwdriver. Before removing the battery note the direction of its

terminals. Install the new battery exactly the same, using caution so as not to

bend, or otherwise damage the battery contacts. Replace the case cover and

carefully tighten the screw. Do not over-tighten the screw. Test the transmitter

to be sure it arms and disarms the alarm.

B. LED STATUS INDICATOR OPERATION

1. LED OFF = The RF-303 is disarmed.

2. LED CONSTANT ON = Indicates opens trigger circuit.

3. LED FAST FLASHING = Passive arming timer is counting down.

4. LED FLASHING = The RF-303 is armed.

5. LED FLASHING IN A 2 FLASH/HOLD SEQUENCE = Alarm breach.

NOTE: If the automatic rearm feature was chosen at the time of installation, a

door must be opened after disarming. If a door is not opened, the RF-303 will

automatically rearm in 60 seconds, and the LED will continue to flash. See

Section (F ) AUTOMATIC REARMING for details.

C. AUDIBLE AND VISUAL ALARM STATUS INDICATOR

1. 1 CHIRP (VEHICLE HORN, OR SIREN) WITH 1 LIGHT FLASH

Alarm is armed.

2. 2 CHIRPS (VEHICLE HORN, OR SIREN) WITH 2 LIGHT FLASHES

Alarm is disarmed.

3. 4 CHIRPS (VEHICLE HORN, OR SIREN) WITH 4 LIGHT FLASHES,

& LED FLASHING IN A 2 FLASH/HOLD SEQUENCE

Alarm is disarmed and has been breached in your absence.