Dynasty Fireplaces EF60US Istruzioni per l'installazione e manuale operativo del proprietario della casa - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per l'installazione e manuale operativo del proprietario della casa per Riscaldatore elettrico Dynasty Fireplaces EF60US. Dynasty Fireplaces EF60US 9. Electric heater with remote control

Magnet
1.5 Install the front onto the insert by locating the pole on both sides well, and slightly push the trim
bottom to fit the engine by magnets. Installation is completed.
2. With front TE3/TE4
2.1 Fix the insert into the mantel as step 1.2 & 1.3 & 1.4, locate the front onto the engine by the pole on
both sides and push down, then fix the trim by 2pcs of ST4*8 screws.
Plug the power supply cord into a wall outlet (120Vac, 60Hz).The cord has a plug as shown at A.
You should follow as shown at the below:

ELECTRICAL CONNECTION

A 15 AMP, 120 Volt, The unit comes standard with 6 feet (1.8 m) three wire cord, exiting from the rear of
the fireplace. Plan the installation to avoid the use of an extension cord. Preferably, the fireplace will be
on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the
fuse to blow when the heater is in operation.
Pole
Pole
GROUNDING
Grounding methods
Screw ST4x8