Gallagher T20 Nota di installazione - Pagina 5

Sfoglia online o scarica il pdf Nota di installazione per Lettore di schede Gallagher T20. Gallagher T20 14.

Installation Note

Secure the tamper tab (located in the base) to the mounting surface using

remaining fixing screw provided.

Connect the reader tail extending from the facia assembly to the building

cable. Connect the wires, as shown in the following diagram.

Note: Do not cut the "Reserved" wires, as they may be used for future

functions.

Fit the facia assembly into the base by clipping the small lip, into the top of the

base and holding the top, press the bottom of the facia assembly down into

the base.

Insert the M3 Torx Post Security screw (using a T10 Torx Post Security

screwdriver) through the hole at the bottom of the base to secure the facia

assembly.

Note: The Torx Post Security screw needs only to be lightly tightened.

The recommended torque for the security screw is 0.7 Nm (0.5 lb/ft). It is

important not to exceed the maximum torque of 1.5 Nm (1.1 lb/ft).

Document Code: 3E3140

Edition 3, April 2013

No. 6 pan head screw

Positive

Negative

Reserved

CDXIV TX

CDXIV RX

Red

Black

Orange

Green

Brown

White

Blue

Gallagher T20 Reader

Base

Tamper tab

Building cable

Page 5