Galvanic Applied Sciences AccuChrome Manuale - Pagina 15

Sfoglia online o scarica il pdf Manuale per Unità di controllo Galvanic Applied Sciences AccuChrome. Galvanic Applied Sciences AccuChrome 20.

4.2 Installation Steps

The AccuChrome Chromatograph with NEMS C9 Module is tested and configured at the

factory. The program parameters are documented in the Configuration Report (enclosed with

the AccuChrome manual and Section 5 of this addendum). To install the AccuChrome

Chromatograph with NEMS C9 Module, follow the instructions provided by Section 3.5 of the

AccuChrome manual. There are no additional gas connection points for units with a NEMS

module installed. All gas inlet and outlet points are common to the NEMS module and GC.

Section 5

Configuring the NEMS Module

For AccuChrome analyzers with a NEMS Module, additional options will be available on the

Configure G.C. tab in the righthand side navigation menu, "NEMS Setup" and "NEMS

Status". Modifying the component table, NEMS parameters and viewing the NEMS status

requires an administrator login. Refer to Section 5 of the AccuChrome User Manual for more

information about setting up and modifying configuration settings.

Refer to Section 5.3 of the AccuChrome User Manual for more information about the

Component Table.

All the components to be analyzed are defined in the Component Table. The column called

"Nems" defines which components are analyzed by the AccuChrome and which components

are analyzed by the NEMS module. A check mark placed in the "Nems" column indicates that

the component will be analyzed by the NEMS module. See Figure A6. The analyzer is pre-

configured at the factory according to the sales specification. Please contact your Galvanic

service technician if changes are required.

Revision 1

2021/10/01