AGS Parksafe Control Panel Manuale di installazione e funzionamento - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Controllore AGS Parksafe Control Panel. AGS Parksafe Control Panel 16. Ventilation control panel
Anche per AGS Parksafe Control Panel: Manuale di installazione e funzionamento (16 pagine), Installazione Funzionamento e manutenzione (16 pagine), Manuale di installazione, funzionamento e manutenzione (20 pagine)

Installation & Operation Manual

Mounting

Unpack all the parts!

Designed for surface mounting, it must be installed by a licensed, insured contractor.

1. Carefully remove the front cover from the unit by

unscrewing the four bolts located at each corner. To do

this – use the socket wrench provided.

2. Mark the four screw holes located on the back of the

enclosure to the wall. Ensure the wall surface is flat to

prevent base distortion.

3. After executing the mounting and the connections –

replace the front cover and insert the security caps over

the four bolts.

Be careful when creating access for cables – Damage to boards will void any warranty!

Any damage attempting to remove the circuit board parts may void any warranty!

Wiring of different circuits shall be separated by means of routing, clamping or barrier!

All Class 2 wiring is to be installed within flexible tubing to maintain segregation between circuits!

For MODBUS communications, a shielded and twisted pair cable is used!

AGS Parksafe Panel - IOM Iss: 6 10-20

Parksafe