AGS Parksafe Control Panel 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} AGS Parksafe Control Panel에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Parksafe Control Panel 16 페이지. Ventilation control panel
AGS Parksafe Control Panel에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (16 페이지), 설치 운영 및 유지보수 (16 페이지), 설치, 운영 및 유지보수 매뉴얼 (20 페이지)

페이지 인쇄

Installation & Operation Manual

Mounting

Unpack all the parts!

Designed for surface mounting, it must be installed by a licensed, insured contractor.

1. Carefully remove the front cover from the unit by

unscrewing the four bolts located at each corner. To do

this – use the socket wrench provided.

2. Mark the four screw holes located on the back of the

enclosure to the wall. Ensure the wall surface is flat to

prevent base distortion.

3. After executing the mounting and the connections –

replace the front cover and insert the security caps over

the four bolts.

Board Connections Diagram

Be careful when creating access for cables – Damage to boards will void any warranty!

Any damage attempting to remove the circuit board parts may void any warranty!

Wiring of different circuits shall be separated by means of routing, clamping or barrier!

All Class 2 wiring is to be installed within flexible tubing to maintain segregation between circuits!

For MODBUS communications, a shielded and twisted pair cable is used!

AGS Parksafe Panel - IOM Iss: 6 10-20

Parksafe