hikam Q7 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Telecamera IP hikam Q7. hikam Q7 6. Smart home wireless ip-camera
Anche per hikam Q7: Manuale rapido (8 pagine)
Stampa la pagina
Option 2: Launch using cable
Optionally, HiKam Q7 can be configured and operated using a LAN cable. If wished, you can switch the
connection from LAN to WLAN later.
- Follow Steps 1, 2 and 3 of Preparation (see above).
- Connect the camera to the router using a LAN cable; a yellow LED light will turn on on the right
(camera online). If light doesn't turn on, check if the router is connected to the internet. Make sure DHCP is
activated.
- Open app and wait a few seconds. Camera will be detected automatically
the camera manually
(see pictures 8, 9 and 10)
Picture 7
- You are asked to name the camera and to enter the initial camera password which is 123.
- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"
(see picture 12)
- You can now follow the live video stream on your smartphone (yellow LED light will flash during live
video mode)
- You can now switch from LAN to WLAN or skip this step: My Camera -> Settings -> Network Settings ->
Choose WLAN -> Confirm -> Enter WLAN password
Picture 13
Picture 14
- If yellow LED light turns off and back on, you successfully switched from LAN to WLAN.
Support:
http://support.hi-kam.com
For further instructions, video tutorials, software, data sheets, specs, FAQs.
Guaranteed feedback within 24hrs, often within 4hrs.
. You can find the device ID on the bottom of the camera (3C ID).
Picture 8
Picture 9
Picture 15
(see picture 7)
Picture 10
(see pictures 13 through 18)
Picture 16
. If not, you can add
Picture 11
Picture 12
(see picture 11)
Picture 17
Picture 18