hikam Q7 매뉴얼 - 페이지 4

{카테고리_이름} hikam Q7에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. hikam Q7 6 페이지. Smart home wireless ip-camera
hikam Q7에 대해서도 마찬가지입니다: 빠른 매뉴얼 (8 페이지)

Option 2: Launch using cable

Optionally, HiKam Q7 can be configured and operated using a LAN cable. If wished, you can switch the

connection from LAN to WLAN later.

- Follow Steps 1, 2 and 3 of Preparation (see above).

- Connect the camera to the router using a LAN cable; a yellow LED light will turn on on the right

(camera online). If light doesn't turn on, check if the router is connected to the internet. Make sure DHCP is

activated.

- Open app and wait a few seconds. Camera will be detected automatically

the camera manually

(see pictures 8, 9 and 10)

Picture 7

- You are asked to name the camera and to enter the initial camera password which is 123.

- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"

(see picture 12)

- You can now follow the live video stream on your smartphone (yellow LED light will flash during live

video mode)

- You can now switch from LAN to WLAN or skip this step: My Camera -> Settings -> Network Settings ->

Choose WLAN -> Confirm -> Enter WLAN password

Picture 13

Picture 14

- If yellow LED light turns off and back on, you successfully switched from LAN to WLAN.

Support:

http://support.hi-kam.com

For further instructions, video tutorials, software, data sheets, specs, FAQs.

Guaranteed feedback within 24hrs, often within 4hrs.

. You can find the device ID on the bottom of the camera (3C ID).

Picture 8

Picture 9

Picture 15

(see picture 7)

Picture 10

(see pictures 13 through 18)

Picture 16

. If not, you can add

Picture 11

Picture 12

(see picture 11)

Picture 17

Picture 18