Hikobike Pulse Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Scooter Hikobike Pulse. Hikobike Pulse 16.

ERROR CODES

Error

Definition

code

Normal

Current error or Controller damage

Throttle error

Motor No Phase position

Hall sensor error

Brake Error

Under Voltage

Motor Stalling

Communication error from controller

Communication error from display

Dealer and Bicycle mechanic routine maintenance:

Your bicycle must be returned to your servicing dealer or bicycle mechanic after 200km of riding

to re-tension the spokes. Then every 1000km for a general service and inspection. Failure to do

this can void your warranty due to unnecessary wear and tear.

User maintenance:

1. Oil the chain frequently, but using special bicycle lubricant (dry or wet). Apply the lube oil on

the chain by turning the pedals and dripping the lube oil on the chain as it moves past, and

spin for a few turns and change into all gears. It is easiest to do this on the bike stand or bike

carrier, with the wheels suspended off the ground. After applying the lube oil it is important

to clean off excess lube oil with a cloth. This removes old dirt that the new lube has

dislodged.

2. Keep tyres pressures within the tire recommendations; see tyres for max PSI inflation.

Normally 35-60psi gives a hard tyre pressure for efficient peddling and battery consumption.

3. Check brake disc pads for even wear patterns. If the brakes become noisy when applied,

take to a service bike shop to check to see if they need replacement.

4. Store your e-bike in a dry place and away from corrosive environments.

Trouble Shooting

Check Controller

Check Throttle

Check Motor

Check Brakes

Check Battery

Check Battery / Motor

Check Controller Connections

Check Display Connections