Hikobike Pulse Посібник користувача - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Hikobike Pulse. Hikobike Pulse 16 сторінок.
Друкувати сторінку
ERROR CODES
Error
Definition
code
Normal
0
Current error or Controller damage
1
Throttle error
2
Motor No Phase position
3
Hall sensor error
4
Brake Error
5
Under Voltage
6
Motor Stalling
7
Communication error from controller
8
Communication error from display
9
MAINTENANCE AND STORAGE
Dealer and Bicycle mechanic routine maintenance:
Your bicycle must be returned to your servicing dealer or bicycle mechanic after 200km of riding
to re-tension the spokes. Then every 1000km for a general service and inspection. Failure to do
this can void your warranty due to unnecessary wear and tear.
User maintenance:
1. Oil the chain frequently, but using special bicycle lubricant (dry or wet). Apply the lube oil on
the chain by turning the pedals and dripping the lube oil on the chain as it moves past, and
spin for a few turns and change into all gears. It is easiest to do this on the bike stand or bike
carrier, with the wheels suspended off the ground. After applying the lube oil it is important
to clean off excess lube oil with a cloth. This removes old dirt that the new lube has
dislodged.
2. Keep tyres pressures within the tire recommendations; see tyres for max PSI inflation.
Normally 35-60psi gives a hard tyre pressure for efficient peddling and battery consumption.
3. Check brake disc pads for even wear patterns. If the brakes become noisy when applied,
take to a service bike shop to check to see if they need replacement.
4. Store your e-bike in a dry place and away from corrosive environments.
Trouble Shooting
Check Controller
Check Throttle
Check Motor
Check Motor
Check Brakes
Check Battery
Check Battery / Motor
Check Controller Connections
Check Display Connections
14