Deagostini MODEL SPACE Honda CB750 FOUR Manuale di montaggio - Pagina 10

Sfoglia online o scarica il pdf Manuale di montaggio per Giocattolo Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16. Pack 12
Anche per Deagostini MODEL SPACE Honda CB750 FOUR: Manuale di montaggio (16 pagine), Manuale di montaggio (16 pagine), Manuale di montaggio (20 pagine), Manuale di montaggio (16 pagine), Manuale di montaggio (16 pagine), Manuale di montaggio (16 pagine), Manuale di montaggio (16 pagine)

Honda CB750 FOUR: Assembly Guide

Stage 10

The front fender

Caution: handle the front

fender with care, as the edges

may be sharp.

Tools

Phillips screwdriver (No. 1)

Cross wrench

Your parts

Front fender stays × 2

Front fender

Caliper holder

Screw (type L)

Screws (type C) × 4

Screws (type K) × 4

Allen key (1.5mm)

Prepare

Front forks (Stage 9)

Front wheel (Stage 3)

Front wheel axle (Stage 9)

Front wheel axle nut (Stage 9)

Screw (type N) × 1 (Stage 9)

Screw (type U) × 1 (Stage 9)

Threading the holes

The holes L3, L4, R3 and R4, circled in blue in these photos, should be tapped prior to

assembly. You should use a type C screw to tap the holes, as it has the correct diameter,

and use the cross wrench received with Stage 9 to screw it in.

Take a type C screw and insert the head into the smallest end of the cross wrench. Press

the projecting end of the screw into one of the blue-circled holes (above) and then turn

the cross wrench as you would a screwdriver. Tighten the screw only about two-thirds

of the way into the hole, and then unscrew it.