HIKVISION D0T Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza HIKVISION D0T. HIKVISION D0T 15. Audio turret camera
Anche per HIKVISION D0T: Manuale d'uso (17 pagine), Manuale d'uso (17 pagine), Manuale d'uso (11 pagine), Manuale d'uso (11 pagine), Manuale d'uso (17 pagine)
Stampa la pagina
3. Drill screw holes and the cable hole on the ceiling.
4. Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to install the expansion bolts at first.
Figure 2-10 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
5. Route the cables through the cable hole, or the side
opening.
6. Install the camera back to the mounting base and
secure it.
Figure 2-11 Install the Camera Back
7. Connect the corresponding cables, such as power
cord, and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
Ceiling/Wall Mounting with Junction Box
2.2.2
Before you start:
You need to purchase a junction box in advance. The
installation of ceiling mounting and wall mounting are
similar. Following takes wall mounting as an example.
Steps:
Figure 2-9 Pry the Mounting Base
Self-tapping Screws
Tilt Position
[0° to 75°]
Figure 2-12 3-Axis Adjustment
Expansion Bolts
Rotation Position
[0° to 360°]