HIKVISION D0T Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження HIKVISION D0T. HIKVISION D0T 15 сторінок. Audio turret camera
Також для HIKVISION D0T: Посібник користувача (17 сторінок), Посібник користувача (17 сторінок), Посібник користувача (11 сторінок), Посібник користувача (11 сторінок), Посібник користувача (17 сторінок)

3. Drill screw holes and the cable hole on the ceiling.

4. Attach the mounting base to the ceiling and secure

it with supplied screws. For cement ceiling, you

need to install the expansion bolts at first.

Figure 2-10 Attach the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping

screws, and expansion bolts.

5. Route the cables through the cable hole, or the side

opening.

6. Install the camera back to the mounting base and

secure it.

Figure 2-11 Install the Camera Back

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Pan Position

[0° to 360°]

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

Ceiling/Wall Mounting with Junction Box

2.2.2

Before you start:

You need to purchase a junction box in advance. The

installation of ceiling mounting and wall mounting are

similar. Following takes wall mounting as an example.

Steps:

Figure 2-9 Pry the Mounting Base

Self-tapping Screws

Tilt Position

[0° to 75°]

Figure 2-12 3-Axis Adjustment

Expansion Bolts

Rotation Position

[0° to 360°]