Maiwe MIGE2205G Series Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Maiwe MIGE2205G Series. Maiwe MIGE2205G Series 20. Industrial gigabit media converter industrial ethernet switch
Stampa la paginaMIGE1203 Series Industrial Gigabit Media Converter/MIGE2205G Series
Industrial Ethernet Switch
The switch must be connected to the protective ground:
Grounding and wiring can effectively suppress the noise impact caused
by electromagnetic interference. The ground connection should be made
before connecting the equipment, from the ground screw to the ground
surface.
3.2. Host Installation
3.2.1. Rail-mounted installation
When taking out the device from the packing box, the rear panel of the
switch should have fixed the connection seat of the DIN rail. If the switch needs
to be installed on the DIN rail, you should check the installation of the DIN rail
before installation.It mainly includes the following two contents:
Whether the DIN rail is firmly fixed and sufficient space on the DIN rail to
install the switch
Whether there is a power supply suitable for switch work on the DIN rail
After selecting the installation location of the switch, follow the steps
below to install the switch on the DIN rail
Insert the upper part of the DIN rail into the slot on the upper part of the
DIN rail connecting seat with the circlip.
Slightly push down on the top panel of the switch and turn the device as
shown in Figure A below
As shown in Figure B below, insert the DIN rail into the DIN rail
connector to confirm that the switch is reliably installed on the DIN rail
3.2.2. Cable connection
After correct installation, you can install and connect the cables, mainly
include the following interface of cable connections.
Business interface
The gigabit port of the terminal equipment provided by the product is a
10BaseT/100BaseTX/1000Base-T Ethernet RJ45 interface. Straight-through
network cable to connect to the terminal device and crossover network cable to
connect to the network device.
- 10 -