DeatschWerks Mustang DW400 Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Pompa dell'acqua DeatschWerks Mustang DW400. DeatschWerks Mustang DW400 6. 2014-2018 general motors truck fuel pump module
Anche per DeatschWerks Mustang DW400: Manuale di installazione (3 pagine), Manuale di installazione (3 pagine)
Stampa la pagina
DeatschWerks
5
15-17 Mustang DW400 Fuel Pump Installation Guide
5 – install the 3/8" tube onto the assembly filter inlet and slide on the two (2) hose clamps. Install the
DW400 into the pump receptacle and install the 1/8" hose onto the venturi inlet receptacle of the
assembly bucket
6 – install assembly center section into the assembly bucket and connect the 3/8" tube to the outlet of
the pump, then tighten the hose clamps. Slide the larger permanent clamp (13/32") onto the hose and
crimp it in place (over the barbs) with a pair of side-cutters. Slide the smaller permanent clamp (11/32")
on the hose and install the free end on the smaller venturi outlet on the pump. Crimp the clamp in place
under the barb
NOTE – removing the assembly top-hat from the assembly center section will allow for more room to
work to install the components