DeatschWerks Mustang DW400 Installation Manual - Page 5

Browse online or download pdf Installation Manual for Water Pump DeatschWerks Mustang DW400. DeatschWerks Mustang DW400 6 pages. 2014-2018 general motors truck fuel pump module
Also for DeatschWerks Mustang DW400: Installation Manual (3 pages), Installation Manual (3 pages)

Print Page

DeatschWerks

15-17 Mustang DW400 Fuel Pump Installation Guide

5 – install the 3/8" tube onto the assembly filter inlet and slide on the two (2) hose clamps. Install the

DW400 into the pump receptacle and install the 1/8" hose onto the venturi inlet receptacle of the

assembly bucket

6 – install assembly center section into the assembly bucket and connect the 3/8" tube to the outlet of

the pump, then tighten the hose clamps. Slide the larger permanent clamp (13/32") onto the hose and

crimp it in place (over the barbs) with a pair of side-cutters. Slide the smaller permanent clamp (11/32")

on the hose and install the free end on the smaller venturi outlet on the pump. Crimp the clamp in place

under the barb

NOTE – removing the assembly top-hat from the assembly center section will allow for more room to

work to install the components