Centre Point 400098 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Livella laser Centre Point 400098. Centre Point 400098 13. Rotary laser level
Stampa la paginaUsing the Detector (continued)
POWER SUPPLY
The detector is supplied with one 9V alkaline
•
battery as its standard power source.
Removing & inserting the alkaline battery
Open the battery cover door.
•
Insert the alkaline battery into
•
the battery tray according to polarity.
Close the battery cover door.
•
SET UP
Mounting the staff clamp
Insert the staff clamp screw
•
into the staff clamp thread.
Rotate the thumb screw until
•
the clamp is secured in place.
OPERATION
Powering on
Switch the detector on by pressing the
•
power button. The speaker will emit a small
tone to indicate the instrument is operating.
The LCD screen will display the battery level
•
detection mode and speaker function.
Speaker function
Press the speaker button
•
to turn the speaker off / on.
Operation with a rotary laser level
Turn on the rotary laser level.
•
To change between coarse and fine detection
•
mode press the coarse / fine mode button/
Move the detector into
•
the path of the laser beam.
Hold the detector upright to
•
detect the horizontal beam (Fig.1)
The direction arrows or level line on the LCD
•
screen will indicate the position of the laser
beam. The detector will emit a constant beep
once the level position has been located.
FIGURE 1
7