Bristan W BASIN08 C Istruzioni per l'installazione e manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Istruzioni per l'installazione e manuale d'uso per Prodotto idraulico Bristan W BASIN08 C. Bristan W BASIN08 C 8. Round push button
Anche per Bristan W BASIN08 C: Istruzioni per il montaggio ed elenco dei contenuti (8 pagine)
Stampa la pagina
Installation Continued – W BASIN09 C (unslotted)
1. Identify all components are present prior to installation
2. Fit the waste body (1) and rubber washer (2) into the basin.
3. Secure waste by tightening back nut (3) as shown in the diagram below.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release the water, press the button again.
5. Check all joints and connections for leaks.
6. See page 4 for aftercare instructions
IMPORTANT
Due to the design of this waste and the type of basins it is suitable for, e.g. and
overflow less glass basin, it is imperative that any water fittings are turned off
before the basin is allowed to overfill
Parts contents list
1. Waste Body
2. Rubber Washer
3. Backnut
03