- ページ 5

配管製品 Bristan W BASIN08 CのPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bristan W BASIN08 C 8 ページ。 Round push button
Bristan W BASIN08 C にも：取付説明書＆内容物リスト (8 ページ)

ページを印刷する

Installation Continued – W BASIN09 C (unslotted)

1. Identify all components are present prior to installation

2. Fit the waste body (1) and rubber washer (2) into the basin.

3. Secure waste by tightening back nut (3) as shown in the diagram below.

4. In order to fill the basin, the button in the middle of the waste needs to be

pressed down. To release the water, press the button again.

5. Check all joints and connections for leaks.

6. See page 4 for aftercare instructions

IMPORTANT

Due to the design of this waste and the type of basins it is suitable for, e.g. and

overflow less glass basin, it is imperative that any water fittings are turned off

before the basin is allowed to overfill

Parts contents list

1. Waste Body

2. Rubber Washer

3. Backnut