Gamma 5003 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma 5003. Gamma 5003 19. 6 point mounting
Anche per Gamma 5003: Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine)
Stampa la pagina
MOUNTING THE FRAME
Adjusting the Frame Support Posts
Place the racquet frame over the center posts and onto
the frame support. Loosen the lever lock bolt on one
support post. Slide the post outward until the center
support of the racquet support slide is positioned near
the inside surface of the racquet frame. Securely tighten
the lever lock bolt.
Adjust the opposite post using the same procedure.
Caution: To avoid racquet damage, the center posts
should not contact the racquet prior to fixing the support
posts.
Adjusting the Frame Shoulder Supports
Being sure the shoulder supports are free to swivel in
thier mountings, simultaneously rotate the shoulder
support adjustment knobs clockwise until both shoulder
supports gently and squarely contact the frame.
Tighten the Frame Support Slides at the head and throat
of the racquet until they gently contact the frame be-
tween the two center main string grommets.
Securing the Frame
Lock the shoulder supports in position by turning the
knob at the base clockwise.
Repeat the adjustment procedure for the remaining
support post.
Re-tighten all of the frame supports in the same order as
before.
Do not overtighten any of the supports as racquet
damage may occur.
The supports should be tightened to the point where the
racquet frame will not move in the mounting system
when the handle is grasped and attempts are made to
move it. Should any supports lose contact with the frame
while stringing, they should be re-tightened.
8