Gamma 5003 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 19 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)
페이지 인쇄
MOUNTING THE FRAME
Adjusting the Frame Support Posts
Place the racquet frame over the center posts and onto
the frame support. Loosen the lever lock bolt on one
support post. Slide the post outward until the center
support of the racquet support slide is positioned near
the inside surface of the racquet frame. Securely tighten
the lever lock bolt.
Adjust the opposite post using the same procedure.
Caution: To avoid racquet damage, the center posts
should not contact the racquet prior to fixing the support
posts.
Adjusting the Frame Shoulder Supports
Being sure the shoulder supports are free to swivel in
thier mountings, simultaneously rotate the shoulder
support adjustment knobs clockwise until both shoulder
supports gently and squarely contact the frame.
Tighten the Frame Support Slides at the head and throat
of the racquet until they gently contact the frame be-
tween the two center main string grommets.
Securing the Frame
Lock the shoulder supports in position by turning the
knob at the base clockwise.
Repeat the adjustment procedure for the remaining
support post.
Re-tighten all of the frame supports in the same order as
before.
Do not overtighten any of the supports as racquet
damage may occur.
The supports should be tightened to the point where the
racquet frame will not move in the mounting system
when the handle is grasped and attempts are made to
move it. Should any supports lose contact with the frame
while stringing, they should be re-tightened.
8