Gamma 5003 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 19 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)
ASSEMBLY INSTRUCTIONS
Installing the Turntable
Insert the center post of the turntable into the bushing
located in the top of the tensioner bar post.
Installing the Frame Support Posts
The GAMMA 5003 support post assemblies are preci-
sion aligned at the factory and are marked for proper
installation on the turntable.
Install the support post with the dot on its base to an
identical dot on the turntable. Align the threaded hole in
the bottom of the frame support post with the slot in the
turntable. Screw the lever lock bolt with washer into the
bottom of the support post and tighten gently.Position
the washer with the rounded edge toward the turntable.
Repeat procedure on the opposite side of the turntable.
Locking the Turntable
The turntable may be locked in any position.
The turntable winged lock knob is packed separately in
the accessory polybag. Install the lock knob into the
threaded hole located on the side of the tensioner bar
post.
Rotate the knob clockwise to lock the turntable, and
counter-clockwise to release the turntable.
6