Gamma 5003 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 19 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

1. Tension Calibration

ASSEMBLY INSTRUCTIONS

Bellows Installation

The bellows assembly is supplied in two pieces and

should be assembled as follows. Place the bellows

section with the flange over the upper support column

with the flange on the top. Place the remaining bellows

over the upper support column and mate it with the

flange on the lower bellows.

Tool Tray Installation

Lower the tool tray over the top of the upper column

support and let it rest loosely on the bellows assembly.

Tension Track Installation

Place the tube of the tension track assembly over the top

of the upper column support. Securely tighten the two

socket set screws on the tension track assembly tube,

locking it to the upper column support. Align the notch in

the tool tray with the tension track bar while raising the

tool tray. Secure the tray with the set screws in the side

of the tray casting.