- ページ 6

ストリング・マシン Gamma 5003のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma 5003 19 ページ。 6 point mounting
Gamma 5003 にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)

ASSEMBLY INSTRUCTIONS

Bellows Installation

The bellows assembly is supplied in two pieces and

should be assembled as follows. Place the bellows

section with the flange over the upper support column

with the flange on the top. Place the remaining bellows

over the upper support column and mate it with the

flange on the lower bellows.

Tool Tray Installation

Lower the tool tray over the top of the upper column

support and let it rest loosely on the bellows assembly.

Tension Track Installation

Place the tube of the tension track assembly over the top

of the upper column support. Securely tighten the two

socket set screws on the tension track assembly tube,

locking it to the upper column support. Align the notch in

the tool tray with the tension track bar while raising the

tool tray. Secure the tray with the set screws in the side

of the tray casting.