Gamma 5003 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Stringing Machines Gamma 5003. Gamma 5003 19 pages. 6 point mounting
Also for Gamma 5003: Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages)
Print Page
ASSEMBLY INSTRUCTIONS
Bellows Installation
The bellows assembly is supplied in two pieces and
should be assembled as follows. Place the bellows
section with the flange over the upper support column
with the flange on the top. Place the remaining bellows
over the upper support column and mate it with the
flange on the lower bellows.
Tool Tray Installation
Lower the tool tray over the top of the upper column
support and let it rest loosely on the bellows assembly.
Tension Track Installation
Place the tube of the tension track assembly over the top
of the upper column support. Securely tighten the two
socket set screws on the tension track assembly tube,
locking it to the upper column support. Align the notch in
the tool tray with the tension track bar while raising the
tool tray. Secure the tray with the set screws in the side
of the tray casting.
5