- ページ 7

ストリング・マシン Gamma 5003のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gamma 5003 19 ページ。 6 point mounting
Gamma 5003 にも：オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ), オーナーズマニュアル (20 ページ)

ASSEMBLY INSTRUCTIONS

Installing the Turntable

Insert the center post of the turntable into the bushing

located in the top of the tensioner bar post.

Installing the Frame Support Posts

The GAMMA 5003 support post assemblies are preci-

sion aligned at the factory and are marked for proper

installation on the turntable.

Install the support post with the dot on its base to an

identical dot on the turntable. Align the threaded hole in

the bottom of the frame support post with the slot in the

turntable. Screw the lever lock bolt with washer into the

bottom of the support post and tighten gently.Position

the washer with the rounded edge toward the turntable.

Repeat procedure on the opposite side of the turntable.

Locking the Turntable

The turntable may be locked in any position.

The turntable winged lock knob is packed separately in

the accessory polybag. Install the lock knob into the

threaded hole located on the side of the tensioner bar

post.

Rotate the knob clockwise to lock the turntable, and

counter-clockwise to release the turntable.