Gamma 5003 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Нанизувальні машини Gamma 5003. Gamma 5003 19 сторінок. 6 point mounting
Також для Gamma 5003: Посібник користувача (20 сторінок), Посібник користувача (20 сторінок), Посібник користувача (20 сторінок)

ASSEMBLY INSTRUCTIONS

Installing the Turntable

Insert the center post of the turntable into the bushing

located in the top of the tensioner bar post.

Installing the Frame Support Posts

The GAMMA 5003 support post assemblies are preci-

sion aligned at the factory and are marked for proper

installation on the turntable.

Install the support post with the dot on its base to an

identical dot on the turntable. Align the threaded hole in

the bottom of the frame support post with the slot in the

turntable. Screw the lever lock bolt with washer into the

bottom of the support post and tighten gently.Position

the washer with the rounded edge toward the turntable.

Repeat procedure on the opposite side of the turntable.

Locking the Turntable

The turntable may be locked in any position.

The turntable winged lock knob is packed separately in

the accessory polybag. Install the lock knob into the

threaded hole located on the side of the tensioner bar

post.

Rotate the knob clockwise to lock the turntable, and

counter-clockwise to release the turntable.