Gamma 5003 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 19 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지)

페이지 인쇄

1. Tension Calibration

ASSEMBLY INSTRUCTIONS

Installing the Tensioner

Remove the button head screw and washer located at

the end of the tensioner bar with the 3 mm hex wrench

provided. Slide the tensioner onto the bar, being careful

to align the bar with all of the bearings and the drive gear

with the gear track. Replace the button head screw and

washer in the end of the tensioner bar.

Setting the Gripper Jaw Spacing

The gripper jaws of the 6004 tensioner are adjustable to

accomodate varying string gauges.

If the string slips through the gripper jaws while pulling

tension, rotate the gripper jaw adjustment screw counter-

clockwise.

If the string is damaged while pulling tension, rotate the

gripper jaw adjustment screw clockwise.

The jaws will be properly adjusted when there is enough

pressure to securely grip the string without causing

damage to the string.