Gamma 5003 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Машины для изготовления струн Gamma 5003. Gamma 5003 19 страниц. 6 point mounting
Также для Gamma 5003: Руководство пользователя (20 страниц), Руководство пользователя (20 страниц), Руководство пользователя (20 страниц)

ASSEMBLY INSTRUCTIONS

Installing the Tensioner

Remove the button head screw and washer located at

the end of the tensioner bar with the 3 mm hex wrench

provided. Slide the tensioner onto the bar, being careful

to align the bar with all of the bearings and the drive gear

with the gear track. Replace the button head screw and

washer in the end of the tensioner bar.

Setting the Gripper Jaw Spacing

The gripper jaws of the 6004 tensioner are adjustable to

accomodate varying string gauges.

If the string slips through the gripper jaws while pulling

tension, rotate the gripper jaw adjustment screw counter-

clockwise.

If the string is damaged while pulling tension, rotate the

gripper jaw adjustment screw clockwise.

The jaws will be properly adjusted when there is enough

pressure to securely grip the string without causing

damage to the string.