Gamma PROGRESSION 600ES-LED Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma PROGRESSION 600ES-LED. Gamma PROGRESSION 600ES-LED 17.

STRINGING THE FRAME

Pulling Tension

To pull tension, wrap the free string clock-

wise around the gripper drum and position

the string between the gripper jaws.

The string must pass over the top half of the

gripper before being placed between the

gripper jaws, as the tension on the string

provides the clamping force to the gripper

jaws.

Gently pull the string until all slack is re-

moved.

Push the Tension Switch toward the right

side of the machine. The string gripper will

rotate and slowly apply tension to the string.

When the set tension has been attained, the

gripper will stop rotating and the green LED

will light. As the tensioned string stretches,

the gripper may rotate intermittently, main-

taining the set tension.

To release the string after clamping, push

the tension switch toward the left side of the

machine. If the string gripper does not re-

lease the string, depress the Gripper Re-

versing Switch once to release the string.

Secure the tensioned main string using the

remaining fixed clamp. Repeat the proce-

dure for all of the remaining main strings and

tie off following the racquet manufacturers

recommendations.

Follow the manufacturer's recommended

stringing pattern for one or two piece string-

ing. This will determine the starting point for

the cross strings. If applicable, tie the first

cross string using an appropriate starting

knot.