Gamma PROGRESSION 600ES-LED Kullanıcı El Kitabı - Sayfa 9
Tel Çekme Makineleri Gamma PROGRESSION 600ES-LED için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma PROGRESSION 600ES-LED 17 sayfaları.
STRINGING THE FRAME
Pulling Tension
To pull tension, wrap the free string clock-
wise around the gripper drum and position
the string between the gripper jaws.
The string must pass over the top half of the
gripper before being placed between the
gripper jaws, as the tension on the string
provides the clamping force to the gripper
jaws.
Gently pull the string until all slack is re-
moved.
Push the Tension Switch toward the right
side of the machine. The string gripper will
rotate and slowly apply tension to the string.
When the set tension has been attained, the
gripper will stop rotating and the green LED
will light. As the tensioned string stretches,
the gripper may rotate intermittently, main-
taining the set tension.
To release the string after clamping, push
the tension switch toward the left side of the
machine. If the string gripper does not re-
lease the string, depress the Gripper Re-
versing Switch once to release the string.
Secure the tensioned main string using the
remaining fixed clamp. Repeat the proce-
dure for all of the remaining main strings and
tie off following the racquet manufacturers
recommendations.
Follow the manufacturer's recommended
stringing pattern for one or two piece string-
ing. This will determine the starting point for
the cross strings. If applicable, tie the first
cross string using an appropriate starting
knot.
8