Jamar Radar Recorder Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per Strumenti di misura Jamar Radar Recorder. Jamar Radar Recorder 4.
Stampa la paginaStep 7 – Securing the Radar Recorder and Monitoring Battery Life
Now that the Recorder has been installed, programmed and checked for accuracy, we're ready to leave it to do its job of
collecting data. Close the front door and latch it shut. Lock the unit into the mounting bracket, and lock the door latches,
using the locks provided. If you wish to add further security to the installation, the chain that was provided with the re-
corder can be wrapped around the pole through the bracket area, then locked in place.
Your Radar Recorder will record data for about seven days on one fully charged (6.4v or higher)
battery. If you will be collecting data for more than a few days at a time, we recommend that you pe-
riodically monitor the charge on the battery to be sure that you get good data throughout the duration
of your study. To do this, open the Recorder, connect the computer and connect to the Radar Record-
er. The main battery voltage is displayed in the Radar Recorder Setup screen, as shown here.
Replace and recharge your battery once the voltage falls between
Step 8 –Downloading Data from the Radar Recorder to the Computer
Note: The Radar Recorder can either be downloaded in the field to a laptop, or brought back into the office to download to a desktop.
Connect the Interface
cable from the
computer to the Radar
Recorder and start the
TRAXPro software.
Select 'Download
Traffic Recorder' from
the Download section
of the Quick Start
menu.
Once the file is saved, it
will appear in TRAXPro.
You can then process the
file and produce reports.
5.8 - 5.7
volts.
Click on Download
Radar Recorder... ... then click on
Begin Download.
Data will begin
to transfer to the
computer from the
Radar Recorder.
Once the download
is complete, you'll
be asked to save the
file. Select a folder,
give the file a name
and click Save.