MAK Dis-360VIR Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza MAK Dis-360VIR. MAK Dis-360VIR 2. Weatherproof & vandalproof ir dome color camera

Stampa la pagina

BRIEF OF PRODUCT

* Sensor (CCD)

Adopt SONY 1/3" CCD Sensor.

* Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera

can get high definition picture in low Lux condition.

* Scanning Mode

NTSC or PAL mode.

* Water Resistance

IP66

* OSD SETTING

LENS

MANUAL/DC/VIDEO

AUTO,FLK,1/50,1/250,1/500,1/2000,1/40000,

SHUTTER

1/5000,1/10000,1/100000

BRIGHTNESS

EXPOSURE

AGC

LOW/MIDDLE/HIGH/OFF

D-WDR

OFF/ON(LEVEL:0-63)

RETURN

ATW1/ATW2/AWC-SET/MANUAL:(INDOOR、OUTDOOR、

WHITE BAL

MANUAL)

OFF

BACK

BLC:AREA SEL/AREA STATE/GAIN/HEIGHT/LEFT/RIGHT/

LIGHT

TOP/BOTTOM

HLC:LEVEL(0-255)/ MODE(ALL DAY/NIGHT ONLY)

DPC

COVER THE LENS THEN PRESS ENTER KRY

COLOR

BURST(OFF/ON)/IR SMART(OFF/ON:IR GAIN/

DAY &

B/W

HEIGHT/WIDTH/LEFT/RIGHT/TOP/ BOTTOM)/IR

NIGHT

LEVEL(HIGH/LOW)

AUTO

D-N(LEVEL/DELAY) /N-D(LEVEL/DELAY)

CAM TITLE

OSD

SET

AREA SEL:AREA1-4

MOTION

AREA STATE:OFF/ON

OFF/ON

HEIGHT/WIDTH/LEFT/RIGHT/TOP/BOTTOM /

DEGREE/VIEW

AREA SEL:AREA1-8

PRIVACY

AREA STATE:OFF/ON

OFF/ON

HEIGHT/WIDTH/LEFT/RIGHT/TOP/BOTTOM /

PARK.LINE

OFF/ON(LT/LB/RT/RB/F/N/T)

SPECIAL

LENS SHAD:OFF/ON

2DNR:OFF/ON

MIRROR:OFF/ON

FONT COLOR:FONT(0-15)/ID&TITLE(0-15)

CONTRAST:0-255 SHARPNESS:0-31

IMAGE ADJ

NEG.IMAGE:OFF/ON

DISPLAY:CRT(PED LEVEL:0-63/COLOR GAIN:0-

255)/LCD(GAMMA:0-1/PED LEVEL:0-63/

COLOR:0-255)/USER(GAMMA:0-1/PED LEVEL:0-

63/COLOR:0-255)

RESET

FACTORY RESET

EXIT

CONNECTING

KEY BOARD

LEFT

DOWN

0－255

TROUBLE AND SOLUTION

1. No Picture after providing power

. May be the power supply voltage abnormity, please check the power

supply voltage and pole whether exactitude.

. Please check all the connecting cable and monitors whether be connected

correctly or not.

2. The picture level direction have flowing interference ripples

. May be caused by the power supply AC ripples, it need filter the wave of the

power supply.

. Check the monitor and peripheral equipments used.

ON/OFF

3. The picture background color changes continuously

. The fluorescent lamp's electromagnetic field cause color roll. This is proper

phenomenon of the cameras.

. Reduce the fluorescent lamp numbers or increase the distance between the

camera and the fluorescent lamps can improve it.

. Use power supply external sync. camera can solve it.

4. The picture smear too mass

COLOR

. The power supply's voltage unstable.

. Connecting cables not connect correctly or have high impedance.

Notes：

●The power supply must through safe attestation. Its output voltage,

current, voltage polarity and operating temperature must match the

camera's requirement.

●When using the camera in the thunderbolt condition,please note to

mount Anti-thunder device or put off the power supply plug and cable.

●In order to capture high quality pictures, the power supply's cable and

video output cable should not be too long.

Monitor

Dis-360VIR

Link wire rule：

RIGHT

Video

Power

PRESS

DC12V Power Supply

INTRODUCTION

Congratulations on your purchase of this product.

This User Guide suits

Dis-360VIR

latest SONY technical of sensor and driver. The most at-

Video

tractive characteristics are small and easy hidden, suits

the elevator and corridor. In addition, it owns the charac-

ters of high definition and stability, strong anti-jamming,

rich and real color. Fixing and using this model are con-

venient too. It is very good for you to apply to your CCTV

DC12V

system.

Please read this instruction manual carefully to en-

sure proper use of the product.

The symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

Instructions in the literature accompanying the appliance.

The symbol is intended to alert the user to the presence of

uninsulated 'dangerous voltage' within the product's

enclosure that may be of sufficient Magnitude to constitute

a risk of electric shock to persons.

RISK OF ELECTRIC. DO NOT OPEN

CAUTION:

SHOCK

DO NOT REMOVE COVER OR BACK NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

CAUTION:

TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE OTHER THAN

SPECIFIED POWER SOURCE.

Note:

● Please note the camera's operating temperature and its using

environment requirement. Avoid using the camera at too high or

too low temperatures. The operating temperature is -30~+60℃.

(Recommendatory operating temperature is -10~+45℃.)

● Never make the camera face the sun or bright object. Other-

wise, it will damage the CCD.

● Do not mount the camera near by the radiator or heater.

product. We adopt the

CAUTION:

TO REDUCE THE RISK OF ELECTRIC