Britax 2406A Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Marsupio Britax 2406A. Britax 2406A 6. Rocker with toys

1. 1.

ATTACHING & USING THE VIBRATION & SOUND UNIT

NOTE: ATTACH THE VIBRATION & SOUND UNIT BEFORE UNFOLDING OR

OPENING THE FRAME. The seat cover is not fully attached for this purpose.

Batteries are not included. You required 1 size C and 3 size AA batteries.

To insert the batteries, unscrew the battery lid

from underside of the unit using appropriate

screwdriver. Place batteries into the correct

position observing the correct polarity and re-fit

the battery lid.

WARNING: NON-RECHAGEABLE BATTERIES

ARE NOT TO BE RECHARGED. ADULT SUPERVISION IS REQUIRED WHEN

CHARGING RECHARGEABLE BATTERIES. USED AND NEW OR DIFFERENT

TYPES OF BATTERIES SHOULD NOT BE MIXED. REMOVE THE BATTERIES

AS SOON AS THEY BECOME EXHAUSTED. SUPPLY TERMINALS FOR

BATTERIES ARE NOT ARE NOT TO BE SHORT CIRCUITTED.

Attach and secure the Vibration & Sound unit into the front base of the frame.

Stand the frame upright and slide the Vibration and Sound unit through the

runners and clicking into position as shown.

Now pull the front seat cover up and over the

Vibration and Sound unit.

www.britax.com.au

B-2

B-1

TO ADJUST THE SEAT POSITION

10.

NOTE: GREY BUTTON 1 IS A SAFETY LOCK AND LEVER 2 IS THE BACKREST

ADJUSTER.

Rotate the rear bar into the static position.

To assist with backrest adjustment place

one hand on the tube area.

There are three positions for the

rocker. To adjust the seat position,

holding the rocker at the side with

one hand, slide the button (1)

across to the right and hold, then

lift lever (2) and adjust the backrest

up or down to the desired position.

Release button and lever when in

desired position.

WARNING: DO NOT ADJUST THE SEAT POSITION WHEN THE CHILD

IS IN THE ROCKER. ONLY PLACE THE CHILD INTO THE ROCKER

ONCE THE SEAT POSITION IS SECURED.