Britax 2406A Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Marsupio Britax 2406A. Britax 2406A 6. Rocker with toys

Stampa la pagina
8.
TO ATTACH THE TOY BAR
A
To attach the toy bar by pushing the ends into position of both sides of the rocker
as shown. To remove, simply pull it out.
CIRCULAR END
SQUARE END
NOTE: ENSURE THAT THE CIRCULAR END IS INSERTED INTO CIRCULAR
HOLE AND THE SQUARE END INTO SQUARE HOLE.
WARNING: DO NOT USE THE TOY BAR AS A HANDLE FOR LIFTING THE ROCKER.
9. TO USE THE STATIC & ROCKING MODE
A
To set the rocker into a static position, rotate the rear bar to the position
as shown.
B
To set the rocker into rocking position, rotate the back bar to the position as
shown.
A
08
www.britax.com.au
A-1
A-2
B
1.
ATTACHING & USING THE VIBRATION & SOUND UNIT (cont.)
Pull all the way down and secure the seat cover by fastening the buckles at the
D
back of the seat
D-1
1: Vibration
(Left: Off, Middle: Low vibration, Right: High vibration)
2: Repeat
1
2
3
(Press to repeat sound or musical tune)
3: Sound
(Left: Off, Middle: Nature sound, Right: Musical tune)
The Nature sound has 4 songs and total time takes around 9 minutes.
The Music sound has 10 songs and total time takes around 12 minutes.
2.
TO REMOVE THE VIBRATION AND SOUND UNIT
A
Close the rocker into the folded position. (See section 11, page 10 )
B
Undo the buckles under the seat and pull the front seat cover up and over the unit.
C
Slightly lift the lever situated on the top of the unit to
release the Vibration and Sound unit and slide it out of
the base.
A
www.britax.com.au
D-2
05