Britax ROADSTER 2 IN 1 WALKER Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Accessori per bambini Britax ROADSTER 2 IN 1 WALKER. Britax ROADSTER 2 IN 1 WALKER 6.

PARTS LIST

1 X Lower base frame

1 X Upper seat frame

1 X Soft seat

2 X Adjusting support legs

4 X Castor wheels

1 X Toy tray

ASSEMBLY - WHEELS

NOTE: For easier assembly, turn the lower base frame

upside down. Turn right side up after wheels

have been assembled.

Insert the wheel posts fully into the holes located

at each corner of the base using moderate force.

Insert all 4 wheels.

NOTE: Clean grip pads regularly, using warm water with

a household soap or mild detergent to maintain

stopping performance.

TO USE THE TOY TRAY

NOTE: You will need 3 x AA batteries to operate the lights and sounds.

Batteries are NOT included.

WARNINGS:

Non-rechargeable batteries are not to be recharged. Adult supervision is

required when charging rechargeable batteries. Used and new or different

types of batteries should not be mixed. Remove the batteries as soon as

they become exhausted. Supply terminals for batteries are not to be short

circuited.

NOTE: All music buttons when pushed will stop other

functions and return to music mode.

Locate the battery section lid on the underside of

the Toy Tray. Undo the screw with a screwdriver.

You may need a screwdriver or tool to open the

cover. Insert 3 x AA batteries following the

orientation indicated.

Replace the lid, replace the screw, tighten screw to

lock the battery lid.

Insert the Toy Tray into the seat tray cavity. Push

forward and down to engage into the seat frame.

To remove Toy Tray, pull up from the finger recess.