Britax ROADSTER 2 IN 1 WALKER Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Accessori per bambini Britax ROADSTER 2 IN 1 WALKER. Britax ROADSTER 2 IN 1 WALKER 6.

WALKER FUNCTION

WALKER MODE(FIXED SEAT POSITION):

NOTE: To lock the support legs from Bounce into

Walker mode, select one of the 3 height positions.

If in number 1 position Bounce mode, push in

and turn the RED button towards the LOCK position.

Do this for each support leg.

To lower the seat to number 2 or 3 position, push

in and turn the RED button from Lock towards

Jump mode.

Now push down on the seat frame until you see

the number 2 or 3 appear. Push in the RED button

and turn towards the LOCK position. Repeat for

both leg tubes. The seat frame should now be

locked into this position.

NOTE: You might need to adjust the leg tube up or

down a little to allow the LOCK pin to engage

the support leg.

To release back to Bounce mode, push in and turn

the RED button (on both sides) towards Jump

indicator. The seat frame will return to Bounce mode.

INSTALLING THE ADJUSTING SUPPORT LEGS

NOTE: There is a left and right support leg.

Identify the hole in the leg moulding and align

this with the small post on the base. Make sure

the RED button is facing to the outside.

Position the support leg over the lower base cavity

as shown. Make sure the RED button is facing to

the outside. Push down with some force until the

support leg locks into the base cavity.

Install both support legs.

Pull up to make sure it is engaged. If not repeat B.