Ganz C-AllView Manuale dell'installatore - Pagina 12

Sfoglia online o scarica il pdf Manuale dell'installatore per Telecamera di sicurezza Ganz C-AllView. Ganz C-AllView 20.

Fuses

Mains input

Power input (F0)

Power PTZ output (F1)

Washer pump (F2)

1 Open one of the knock-out panels of the wiring centre box and fit a suitable

cable water-sealing cable grommet.

2 Feed the bare ends of the composite cable in through the grommet and connect

each cable within the wiring centre as follows:

• Primary video

Fit a BNC connector to coaxial cable marked as 'Video 1' and connect it to the

BNC socket labelled 'VIDEO IN 1'.

• Secondary video (if present)

Fit a BNC connector to coaxial cable marked as 'Video 2' and connect it to the

BNC socket labelled 'VIDEO IN 2'.

• Power

Connect the Red cable to the terminal marked 'PTZ 1P'.

Connect the Black cable to the terminal marked 'PTZ 1N'.

• Washer

Connect the Orange cable to the upper terminal marked 'AUX1'.

Connect the White cable to the upper terminal marked 'AUX2'.

• RS485 telemetry

Connect the Yellow cable to the upper terminal marked 'DATA 5'. Connect

the Blue cable to the upper terminal marked 'DATA 6'.

• Earth

Connect the Green/Yellow cable to the Earth connection of the mains input

terminal block.

The IR Lamp and Ethernet terminals are reserved for future use.

RC-PSB1

230VAC

3.15A

24VAC

3.15A

24VAC

RC-PSB2

3.15A