CeoTronics CT-DECT Base Manuale di istruzioni per l'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ricetrasmettitore CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20. Headset for wireless duplex communication
Anche per CeoTronics CT-DECT Base: Manuale di istruzioni per l'uso (20 pagine), Manuale di istruzioni per l'uso (20 pagine), Manuale di istruzioni per l'uso (14 pagine), Manuale di istruzioni per l'uso (14 pagine)

2.2.1

Power supply

Power for the CT-DECT Multi is supplied either by three rechargeable batteries or by 3 alkaline batter-

ies in the battery compartment.

2.2.2

Audio signals used

Two different audible tones are used for signaling the operating status via the communication set con-

nected to the device. The tone for the indication of positive operating status has a higher frequency

than the tone for the indication of negative operating status. Signaling of the various operating status is

effected by a varying number of consecutive high tones or low tones.

Positive acknowledgement tone

All positive operating status are indicated by a high tone.

Negative acknowledgement tone and error tone

All negative operating status and error status are indicated by a low tone.

2.2.3

Plug-in connections

Figure 3: Connecting and disconnecting plug-in connections

Hold the connector behind

the grooved sliding sleeve

and put it onto the jack.

CAUTION!

The locked plug-in connection may neither be twisted (figure 4) nor bent (figure 5). Improper

handling could damage the plug-in connection.

Figure 4

Never pull the cable of the plug-in connection. Pulling the cable may damage the plug-in con-

nection (figure 6).

Turn the connector

carefully on the jack

until it starts sliding into

it.

Figure 5

Push the connector

into the jack until the

sliding sleeve en-

gages in direction of

the arrow, locking the

connector.

To unlock the plug-in

connection, simply

hold the connector at

the grooved sliding

sleeve and pull it out

off the jack.