CeoTronics CT-DECT Base Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CeoTronics CT-DECT Base. CeoTronics CT-DECT Base 20 pagina's. Headset for wireless duplex communication
Ook voor CeoTronics CT-DECT Base: Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (14 pagina's), Gebruiksaanwijzing (14 pagina's)

Pagina afdrukken

2.2.1

Power supply

Power for the CT-DECT Multi is supplied either by three rechargeable batteries or by 3 alkaline batter-

ies in the battery compartment.

2.2.2

Audio signals used

Two different audible tones are used for signaling the operating status via the communication set con-

nected to the device. The tone for the indication of positive operating status has a higher frequency

than the tone for the indication of negative operating status. Signaling of the various operating status is

effected by a varying number of consecutive high tones or low tones.

Positive acknowledgement tone

All positive operating status are indicated by a high tone.

Negative acknowledgement tone and error tone

All negative operating status and error status are indicated by a low tone.

2.2.3

Plug-in connections

Figure 3: Connecting and disconnecting plug-in connections

Hold the connector behind

the grooved sliding sleeve

and put it onto the jack.

CAUTION!

The locked plug-in connection may neither be twisted (figure 4) nor bent (figure 5). Improper

handling could damage the plug-in connection.

Figure 4

Never pull the cable of the plug-in connection. Pulling the cable may damage the plug-in con-

nection (figure 6).

Turn the connector

carefully on the jack

until it starts sliding into

it.

Figure 5

Push the connector

into the jack until the

sliding sleeve en-

gages in direction of

the arrow, locking the

connector.

To unlock the plug-in

connection, simply

hold the connector at

the grooved sliding

sleeve and pull it out

off the jack.