HIKVISION TURBO HD DS-2CE56H0T-ITMF Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza HIKVISION TURBO HD DS-2CE56H0T-ITMF. HIKVISION TURBO HD DS-2CE56H0T-ITMF 16. Turbo hd bullet & dome camera
Anche per HIKVISION TURBO HD DS-2CE56H0T-ITMF: Manuale d'uso (17 pagine)
Stampa la pagina
mounting as the reference, when adopting the wall
mounting.
Steps:
1. Disassemble the turret camera by rotating the
camera to align the notch to the clip plate, as shown
in the Figure 2-10.
Figure 2-10 Disassemble the Camera
2. Pry the mounting base to remove the mounting
base from the camera body.
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting the ceiling outlet to route the cable.
5. Secure the mounting base to the ceiling with the
supplied screws.
Figure 2-12 Fix the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
6. Route the cables through the cable hole, or the side
opening.
7. Secure the camera on the mounting base.
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
Figure 2-11 Drill Template
Figure 2-13 Secure the Camera
Clip Plate
Notch
Expansion Bolts
Fixing Screw