Green Speed GT Series Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Bicicletta Green Speed GT Series. Green Speed GT Series 14.

Remove the coin and refit the screw in its correct position and pinch up one of the screws. Lightly

grease the pedal threads and fit the pedals. Hint left and right pedals have different threads, the

right one tightens clockwise, the left one counterclockwise. Tighten the pedals. Sit on the seat and

place your heels on the pedals and adjust the extension so that your leg is straight when in the

outstretched position (Fig. 4.3). To align the extension, sight along the top of the bottom bracket

to the front of the seat cover and rotate the extension until they line up. Tighten screws when

happy. Note you may find small adjustments can make a big difference, so play around with this

setting before you do a long ride.

Fig. 4.3

Fitting the Chain

Fit the chain next following the diagrams shown

below. Start by feeding the chain through the

front derailleur cage, down the chain tube, under

the pulley, over the sprockets and down through

the rear derailleur (Fig. 5.1). Put the rest through

the lower tube (Pic. 5.2). Note make sure the chain

is not twisted inside the tubes. You are now ready

to join the chain. Check the Chain Adjustment

section on page 5 to make sure the chain is the

right length. Note if this is not correct, damage

may occur to your rear derailleur.

Fig. 5.1

to rear

sprockets

(cluster)

to rear

derailleur

chain fitting

join

chain line

Assembly

Pic. 5.2

Pic. 5.3