Green Speed GT Series Manual - Página 5

Procurar online ou descarregar pdf Manual para Bicicleta Green Speed GT Series. Green Speed GT Series 14 páginas.

Green Speed GT Series Manual
Remove the coin and refit the screw in its correct position and pinch up one of the screws. Lightly
grease the pedal threads and fit the pedals. Hint left and right pedals have different threads, the
right one tightens clockwise, the left one counterclockwise. Tighten the pedals. Sit on the seat and
place your heels on the pedals and adjust the extension so that your leg is straight when in the
outstretched position (Fig. 4.3). To align the extension, sight along the top of the bottom bracket
to the front of the seat cover and rotate the extension until they line up. Tighten screws when
happy. Note you may find small adjustments can make a big difference, so play around with this
setting before you do a long ride.
Fig. 4.3

Fitting the Chain

Fit the chain next following the diagrams shown
below. Start by feeding the chain through the
front derailleur cage, down the chain tube, under
the pulley, over the sprockets and down through
the rear derailleur (Fig. 5.1). Put the rest through
the lower tube (Pic. 5.2). Note make sure the chain
is not twisted inside the tubes. You are now ready
to join the chain. Check the Chain Adjustment
section on page 5 to make sure the chain is the
right length. Note if this is not correct, damage
may occur to your rear derailleur.
Fig. 5.1
to rear
sprockets
(cluster)
to rear
derailleur
chain fitting
join
chain line
Assembly
Pic. 5.2
Pic. 5.3