KitchenAid KUDD01DPPA0 Manuale di istruzioni per l'installazione - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavastoviglie KitchenAid KUDD01DPPA0. KitchenAid KUDD01DPPA0 16. Drawer dishwasher
Stampa la pagina
Option
2: Top attachment
1,
If the top attaching
brackets
are used, open
the top drawer
slightly:
2,
Screw
the top attaching
brackets
to the underside
of the
counter
with two #8 Phillips
head screws.
IMPORTANT:
The top attaching
brackets
can accommodate
a maximum
3/4" (19 mm) vertical
gap.
....... top attaching bracket
3,
Close the top drawer,
Option
1: Sink
drain
waste
tee connection
1,
Route
the drain
hoses
as shown
and press
the hoses
into
the drain
hose
support.
2,
Decide
if the drain
hoses
need
to be trimmed,
If they
do,
trim
them,
3,
Slip
a wire
clip over
each drain
7_ wireclip
hose.
Push the hoses
into the
drain
hose connector
firmly,
5 ciicks,
4,
Position
the wire
clips
between
the two
positioning
ribs
on the
drain hose
drain
hose connector,
connector
5,
Attach
the drain
hose
connector
to the waste
tee using
the supplied
hose
clamp,
6,
Attach
the drain
hose
support
bracket
to the cabinet
with
a #8 Phillips
head
screw
at the height
shown
below,
NOTE:
The drain
hose connector
must not support
the weight
of excess
hose length.
Keep hoses as fully extended
as
possible.
Option 2: Garbage disposaB connection
1, Route the drain hoses as shown and press the hoses
into the drain hose support,
Decide if the drain hoses need to be trimmed,
If they do,
2,
3,
4,
trim
them,
Slip
a wire
clip
over
each drain
hose,
Push the hoses
into the
drain
hose
connector
firmly,
5 clicks,
Position
the wire
clips
between
the two
positioning
ribs
on the
drain
hose
connector,
50 wire clip
wire clip ¢_
drain hose
connector
5,
6,
Attach
the drain
hose
connector
to the garbage
disposal
using
the supplied
hose
clamp,
Attach
the drain
hose
support
bracket
to the cabinet
with
a #8 Phillips
head
screw
at the height
shown
below,
NOTE:
The drain
hose connector
must not support
the
weight
of excess
hose length.
Keep hoses as fully extended
as possible.
o_
!
oE
water supply
..... 8 " (20,3 cm) rain. bend
radius from valve
Option
3: Air break
connection
1,
Route the drain
hoses
as shown,
2,
3,
4,
Decide if the drain hoses need to be trimmed,
If they do,
trim
them,
Slip
a wire
clip
over
each drain
hose,
Push the hoses
into the
drain
hose
connector
firmly,
5 clicks,
Position
the wire
clips
between
the two
positioning
ribs
on the
drain
hose
connector,
#_) wire clip
wire clip U
drain hose
connector
10