KitchenAid KUDD01DPPA0 Manuale di istruzioni per l'installazione - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavastoviglie KitchenAid KUDD01DPPA0. KitchenAid KUDD01DPPA0 16. Drawer dishwasher
Stampa la pagina
Option1:Insta{Istandardtoe pane{
NOTI=S: Depending oncountertop height, youmay nothave to
trimthetoepanel.
Rugs p laced infront o fdishwasher
could interfere with
toepanel. Clearance
between floorand toepanel may
need toinclude t herugthickness.
1. Partially open thebottom drawer.
2. Turn thetoepanel upside d own andhold vertically against the
bottom edge ofthetubside (not t hefront).
3. Onthetoepanel, mark where t hetub's bottom edge is.
7,
8,
Remove
any rough edges
by sanding
smooth,
Partially
open bottom
drawer.
Position
toe panel
behind
door
and slide onto the underside
of tub.
toe panel
clamping
(_
mounting rail
screw
bottom edge
of tub side
Close the drawer. Check that there is
1/2" (12.7 mm) minimum clearance
between the bottom edge of the toe
panel and the floor.
if not, remove the toe panel and shorten
using the utility knife. Remove any rough
edges.
10. Slide toe panel back onto mounting rails.
ss{{_ i
(12_7 mm)
floor
11. If needed, you may simply push the toe panel back or forward
on the mounting rail.
12. With a Phillips screwdriver, tighten the toe panel clamping
screws on both sides.
13. Plug in dishwasher or reconnect power.
14. Go to "Complete Installation" section.
4,
5,
6,
On a stable surface, place toe panel on a wooden cutting
board and pick the closest groove to the mark. If the mark is
between two grooves, choose the groove that makes the toe
panel the shortest.
At the selected groove, use a utility
knife and cut the vertical rib the
length of the toe panel until entire
piece is removed.
ear of
Snap off the toe panel tabs.
toe panel
toe panel
tabtoe panel
12