Makita 3901 Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 3901. Makita 3901 16. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Anche per Makita 3901: Opuscolo (1 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (17 pagine)

Stampa la pagina

IO.

For Corner Joint only

Place the tool on the workpiece so that

the blade is facing down.

For T-Butt Joint only

Remove the angle guide from the tool.

Place the tool on the workpiece so that

the blade is facing down.

11. Repeat the steps 6 - 8 to cut the slots in the horizontal or the other workpiece.

If you do not need to center the blade in the board thickness, proceed as follows:

For Corner Joint, Miter Joint, Frame Joint and Edge-To-Edge Joint only

Remove the angle guide from the tool.

Set the fence at 90° for Corner Joint,

Frame Joint and Edge-To-Edge Joint or

4 5 O

for Miter Joint.

i i

)

Follow steps 1 - 11 excluding steps 5

and 10 described above.