Makita 3901 Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 3901. Makita 3901 16. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Anche per Makita 3901: Opuscolo (1 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (17 pagine)

Stampa la pagina

For T-Butt Joint only

)

Fit the t w o workpieces together as they will appear in the finished joint position.

i i ) Lay the vertical workpiece on the horizontal one. Clamp both workpieces to the work-

bench as shown in the figure.

i i i

)

Remove the angle guide from the tool.

i v

)

Follow the steps 2, 4, 6, 7, 8 and 1 1 described above.

F-

How t o trim wall or ceiling panels

First unplug the tool. Open the blade cover and replace the existing cutter blade with an

optional circular saw blade 110 mm

(4-3/8")

in diameter. Refer to the "Removing or installing

the blade" section which is described later. Remove the rubber facing from the base. Then

close and secure the blade cover. Now the max. depth of cut is 25 m m (1").

CAUTIO N :

Be very careful that the blade has been properly mounted on the tool spindle between the

inner flange and the lock

nut.

Be sure t o securely tighten the lock

nut.

Lock nut

Blade

cover

Set the depth of cut to "MAX". Rest the base on the floor (when trimming the wall panels)

or the wall (when trimming the ceiling panels). Using the floor or wall as a guide, trim wall

or ceiling panels. Feed in ; h e direction of the arrow.