Makita 4131 Manuale di istruzioni - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 4131. Makita 4131 14. Metal cutter
Anche per Makita 4131: Manuale di istruzioni (12 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (12 pagine)
Stampa la pagina
1
1. Sight window
1
1. Dust cover
2. Knob
12
CAUTION:
•
Do not use a deformed or cracked blade. Replace it with
a new one.
•
Do not stack materials when cutting them.
•
Do not cut hardened steel, stainless steel, aluminum,
wood, plastics, concrete, tile, etc. Cut only mild steel.
•
Do not touch the saw blade, workpiece or cutting chips
with your bare hand immediately after cutting, they may
be extremely hot and could burn your skin.
•
Always
appropriate for your job. The use of inappropriate saw
blades may cause a poor cutting performance and/or
present a risk of personal injury.
Chip disposal
005355
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before removing or installing the dust cover.
•
The dust cover may become hot due to hot chips. Do not
touch the cutting chips or dust cover with your bare
hand.
When the cutting chips are visible through the sight window,
dispose of them.
Push and turn the knob clockwise to the
005347
remove the dust cover. Dispose of the cutting chips accumu-
2
lated inside the dust cover.
CAUTION:
•
Do not turn the tool upside down. The cutting chips
accumulated inside the dust cover may fall out of the
dust cover.
•
Handle the dust cover carefully so that it will not be
deformed or damaged.
use
the
carbide-tipped
saw
blades
symbol and