Makita 4131 사용 설명서 - 페이지 12
{카테고리_이름} Makita 4131에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4131 14 페이지. Metal cutter
Makita 4131에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (12 페이지), 사용 설명서 (12 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
1
1. Sight window
1
1. Dust cover
2. Knob
12
CAUTION:
•
Do not use a deformed or cracked blade. Replace it with
a new one.
•
Do not stack materials when cutting them.
•
Do not cut hardened steel, stainless steel, aluminum,
wood, plastics, concrete, tile, etc. Cut only mild steel.
•
Do not touch the saw blade, workpiece or cutting chips
with your bare hand immediately after cutting, they may
be extremely hot and could burn your skin.
•
Always
appropriate for your job. The use of inappropriate saw
blades may cause a poor cutting performance and/or
present a risk of personal injury.
Chip disposal
005355
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before removing or installing the dust cover.
•
The dust cover may become hot due to hot chips. Do not
touch the cutting chips or dust cover with your bare
hand.
When the cutting chips are visible through the sight window,
dispose of them.
Push and turn the knob clockwise to the
005347
remove the dust cover. Dispose of the cutting chips accumu-
2
lated inside the dust cover.
CAUTION:
•
Do not turn the tool upside down. The cutting chips
accumulated inside the dust cover may fall out of the
dust cover.
•
Handle the dust cover carefully so that it will not be
deformed or damaged.
use
the
carbide-tipped
saw
blades
symbol and