Avantco Equipment DC1800 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Gamme Avantco Equipment DC1800. Avantco Equipment DC1800 6. 1800 watt drop-in induction range

Functionality & Purpose

Examples of Usable Pans

Steel or cast iron, enameled iron, stainless steel, flat-bottom pans / pots with diameter from 4 ¾ inches to 10 ¼ inches.

Examples of Non-Usable Pans

Heat-resistant glass, ceramic, copper, aluminum pans/pots. Rounded-bottom pans/pots with bottom measuring less

than 4 ¾ inches.

WARNING!

DO NOT TOUCH COOKWARE, HEATING SURFACE, FOOD, OR LIQUID

WHILE THE UNIT IS IN OPERATION!

WARNING!

ALWAYS MAKE SURE THAT THE UNIT IS OUT OF REACH FOR CHILDREN!

Before First Use

• Remove all packaging components and make sure that the appliance was not damaged during shipping.

• Before using for the first time clean the unit surface with a slightly moist cloth and dry

(see "Cleaning and Maintenance").

•

Place the unit on a flat, heat resistant surface.

•

The unit is NOT designed to be enclosed or built into an area.

•

There must be ¾" (2 cm) of space between the bottom of the unit and any surrounding surface.

•

DO NOT BLOCK THE AIRFLOW OF THE UNIT!

There must be a minimum of 4" (10 cm) between the induction range and any surrounding surface to allow

sufficient airflow around the unit. Blocking the airflow will potentially overheat the unit.

COUNTERTOP

1. Place the unit on a flat, heat resistant surface.

2. Plug the power cord into a grounded electrical outlet with the appropriate voltage level. Make sure that the unit is

the only appliance plugged into the electrical outlet.

Incorrect voltage levels will damage the unit. Incorrect voltage, modification to the power cord or electrical

components will void the warranty.

DROP-IN

1. Choose a flat, heat resistant countertop for the mounting surface.

2. Measure the area of the cutout, including the countersink area.

The depth of the surface around the cutout must be reduced to allow for the countersink.

NOTE

Exposed wood or particle board edges must be sealed with an appropriate waterproofing material.

Seal the edge between the glass and the countertop with silicone or similar material. Failure to do so

may result in damage to the countertop.

3. Seal the joint between the induction warmer and countertop.

4. Plug the power cord into a grounded electrical outlet with the appropriate voltage level listed on the unit.

www.AvantcoEquipment.com

User Manual